搬家是一件很麻煩的事情，尤其的對于大件家具和電器的搬運。那么，在搬運過程中，也難免會碰到一些剮蹭、磕碰等情況。淄博搬家公司在這里給您介紹一些補救家具磕碰劃痕的小竅門。
    The move is a very troublesome thing, especially for large furniture and appliances handling. So, in the course of handling, it will inevitably encounter some rub, bump etc.. Zhangqiu moving company to introduce you to some of the remedial furniture bump scratch tips here.
    1、鉸鏈松動 可取一細如筷子的木料，削尖涂上白膠水塞于木螺絲孔內錘進，錘進后折斷木條，淄博搬家公司http://www.cqkdemy.com/再將木螺絲重新旋進，即可旋緊。
     the hinge loose desirable a fine as chopsticks sharpened wood, painted white water plug in - hole into the wood screws, hammer into the wood after the break, Zhangqiu moving company and the wood screw is screwed into the back, you can tighten.
　　2、油漆污點，油漆滴在家具上，未干時可用有蠟水的布抹掉，或用鋼絲絨蘸上蠟油輕輕擦拭。如油漆已干，則可把亞麻籽油滴在油漆上使之變質，然后用布抹掉，再用灰石和蠟油磨光即成。
     paint stain, paint drops on the furniture, not available with wax cloth to erase, or steel wool dipped in wax oil gently wipe. If the paint is dry, can put metamorphic flax seed oil droplets in the paint to make, and cloth to erase, and grey stone and wax polished into.
　　3、油漆剝落，清漆家具表面小塊油漆剝落后可取同色廣告顏料涂補，再用清漆涂在表面，即完好如初。
      peeling paint, varnish surface of small pieces of furniture, paint peeling off the desirability of the same color poster paint coating, and then varnish coating on the surface, i.e. intact.
　　4、火灼損傷，先將火灼過的木質用刀片除去，再用鋼絲絨擦干凈，然后用補家具的膠木填好，油磨平滑，再用家具蠟?zāi)ス狻?br />       fire damage, to the wood burning blade to remove, and then steel wool clean, and then use s Furniture bakelite fill oil, grinding smooth, use furniture wax polish.
　　5、抽屜磨損 抽屜道磨損大，可將抽屜拉出翻身，搬家公司用電烙鐵在抽屜道上燙層蠟燭油，使油液滲入木質。用同法在桌柜相應的道上也燙上蠟燭油，就可減少抽屜磨損。
     wear drawer drawer road wear, can pull the drawer turn over, moving companies use electric iron layer candle oil in a drawer Road, the oil liquid penetrate wood. Cabinet table with the same method in the corresponding channel is also hot on the candle oil, can reduce the wear drawer.
　　6、金屬家具除銹 可用紗布蘸少許縫紉機油將銹斑擦凈，露出銹蝕處再用1號細水磨砂紙擦除銹跡，用紗布將銹屑油污揩凈，然后以2?誜3比例將油漆與松節油調配，均勻涂在銹蝕處。
     metal furniture rust with gauze dipped in a little sewing machine oil will rust cleaning, corrosion and exposed at then 1 fine water sand paper to wipe away, with gauze will rust oil wipe, and then to 2? Shua 3 proportion will paint with turpentine deployment, evenly coated in rust.
　　7、電鍍家具除銹，小件可放入盛有機油的盆里浸泡除銹;大件可用刷子或棉紗蘸機油涂于銹處，淄博搬家公司http://www.cqkdemy.com/片刻后再來回擦拭，即可除去銹跡。
    plating furniture cleaning, small pieces can be placed in the oil bowl soaking cleaning; large usable brush or cotton dipped in oil coating on the rust, Zhangqiu moving company then come back clean, you can remove the rust.
　　8、漆澤暗淡木家具漆面光澤的恢復有兩種辦法。一是用半杯清水加1/4杯醋，用軟布蘸之擦拭。二是用酒精或花露水、茶水浸濕軟布輕拭一二次，再擦一遍地板蠟。
     paint Ze dim wood furniture lacquer gloss restoration in two ways. A half cup of water is used to add 1/4 cup vinegar, wipe with a soft cloth dipped. The two is to use alcohol or toilet water, tea and soft cloth soaked swab for one or two times, and then wipe the floor wax.