現在是電器時代，空調、冰箱、洗衣機、跑步機等等作為家居的基本配備，這些高科技產品給我們帶來便利的同時，也為我們帶來了煩惱，就拿搬家來說吧，空調拆卸就是一個很大的問題。
    Now is the electrical time, air conditioning, refrigerator, washing machine, treadmill and so on as the basic equipped with home furnishing, these

high-tech products bring convenience to us, also brought trouble for us, take move it, air-conditioning disassembly is a big problem.
　　在搬家的過程中，拆卸空調是一個必經的過程，那么了解拆卸空調的步驟也就成為重中之重，到底空調在拆卸與重裝的時候，需要注意哪些常識呢？淄博搬家公司http://www.cqkdemy.com/來講解一下：
     In the process of moving in, removing the air-conditioning is a necessary process, then to remove air conditioning step has become the priority

among priorities, exactly when removing and reinstalling air-conditioning, need to pay attention to what common sense? Zhangqiu moving company to

explain:
　　1.根據需求確定室內機的位置，接著選取管道的出口打墻眼，然后用水平儀校正水平位置，在預定的位置訂好室內機的掛盤，將管穿出后掛好室內機。
      according to the demand to determine the indoor location, then hit the wall at the outlet of a pipeline, and then correct the horizontal

position using the level set of indoor machine, hanging plate at a predetermined position, the tube through the hanging indoor machine.
　　2.根據管的長度確定室外機的位置，確保它保持水平。
      according to the length of the tube to determine the position of the machine outdoor, ensure that it remains level.
　　3.接好高低壓管，先打開高壓閥，然后松低壓管鎖母（排出管路中的空氣），聽到有出氣的聲音8～10秒后擰緊該鎖母，打開低壓閥，按順序接好電線。
      connect the high and low pressure pipe, first open the pressure valve, and then loosen lock nut low pressure pipe (discharge pipe air), hear the

air voice 8 ~ 10 seconds after tightening the lock nut, open the low pressure valve, in order to connect the wire.
　　4.接通電源，試機。用肥皂水檢查管路接頭（鎖母處）有無泄漏。
      switch on the power, the test machine. Check with soap and water pipe joints (lock mother) has no leakage.

淄博搬家公司http://www.cqkdemy.com/